Your position: Home > FPV Racing Drone
  • Happymodel Mobula7 1S Micro FPV Whoop Drone with Jumper T Pro ELRS Radio
  • Happymodel Mobula7 1S Micro FPV Whoop Drone with Jumper T Pro ELRS Radio
  • Happymodel Mobula7 1S Micro FPV Whoop Drone with Jumper T Pro ELRS Radio
1/1
  • Happymodel Mobula7 1S Micro FPV Whoop Drone with Jumper T Pro ELRS Radio
  • Happymodel Mobula7 1S Micro FPV Whoop Drone with Jumper T Pro ELRS Radio
  • Happymodel Mobula7 1S Micro FPV Whoop Drone with Jumper T Pro ELRS Radio

Happymodel Mobula7 1S Micro FPV Whoop Drone with Jumper T Pro ELRS Radio

mobula7 whoop drone
ELRS receiver and radio
beat choice for indoor flying.
0.0 (0 Reviews)
$0.00 $203.99
Received successfully
Coupon Code
CONTINUE SHOPPING
    Please select the information you wantX
  • Ships From:
    China
    Please select the information you wantX
Quantity
-
+
Frequently Bought Together
more
Frequently Bought Together
  • Description
Happymodel Mobula7 1S brushless fpv whoop drone comes with Jumper T Pro with Internal 2.4G 1000mW ExpressLRS ELRS module Radio. It is the best choice in the whoop season. It is really the best fpv whoop drone to fly indoors. 
 
The new RS0802 motors comes with a new unibell design, use 1.5mm shaft and include PCB bottom plate, high efficiency and much more reliable.
 
New onboard OpenVTX , max power up to 400mw, provide RCE and PIT mode, it was very useful for race event.
 
Features:
X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and Openvtx
VTX Power up to 400mw
ELRS V2.0 Support
NEW RS0802 KV20000 motors
Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
Smooth and powerful
Compatible for 1S Lipo/LIHV
Recommend 1S 450mah/550mah/650mah battery(Not include)
 
Specifications:
Brand Name: Happymodel
Item Name: Mobula7 1S 75mm Micro FPV whoop drone
Wheelbase: 75mm
Size: 99mm*99mm*40mm
Weight: 24g
  
Spare parts specifications:
Motor Mode: RS0802 KV20000
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ10.5mm*13.5mm
Weight(g):2.0g
No.of Cells(Lipo):1S only
Propellers Weight:0.24g
Material:PC
Pitch:1 inch
Props Dia:40mm
Center Thickness:5mm
Center Hole Dia:1.5mm
Flight controller X12 ELRS V1.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR
X12 PNP V1.0 flight controller without onboard receiver Target: CRAZYBEEF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU6000 or ICM20689(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
Built-in voltage detection
Built-in current sensor
Onboard 4in1 ESC Power supply: 1S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Z_H_30_REV16_7.HEX
Default protocol: DSHOT300
Support Bluejay firmware
Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz
Antenna : SMD antenna
Telemetry output Power: <12dBm
Receiver protocol:  SPI ExpressLRS
Compatible with ExpressLRS V2.0 TX Module
Couldn’t flash separately ExpressLRS firmware
Onboard Frsky SPI D8/D16 receiver Version SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 model
Channels: 8ch
No ground interference ( Transmitter and receiver 1 m from the ground): 200meter
Failsafe support
Onboard Flysky SPI receiver Version SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 200meter
Failsafe support
PNP Version
(without onboard receiver)
Full UART1 for external Receiver
Support CRSF/GHOST/SBUS/IBUS/DSMX protocol
IR1 pad(invert RX1) used for SBUS input
Onboard 5.8g OPENVTX Firmware version: OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Runcam Nano3 Model: RunCam Nano 3
Image Sensor: 1/3" CMOS
Horizontal Resolution: 800TVL
Lens : 2.1mm(M8) FOV 150°
Signal System: NTSC
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: [email protected]
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: [email protected]  [email protected]
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm
Lipo Battery Capacity:650mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 60mmx18mmx8mm
Weight: 16g
Connector: PH2.0
 
Jumper T Pro with Internal 2.4G 1000mW ExpressLRS ELRS module Radio Controller Hall Sensor Gimbals EdgeTX/OpenTX
 

Main Feature:
Internal 2.4G ExpressLRS Module
OpenTX firmware
Hall sensor gimbals
USB-C internal charging
Up to 16 channels of output (depending on the receiver)
Wide voltage input (2pcs 18650 recommended)
Vibration reminder function
Support telemetry (depending on the receiver)
LUA Script support: Yes

Specification:
Size:160*128*68
Weight: 488g (without battery)
Working voltage: DC6V-DC8.4V
Firmware: OpenTX
Display: 1.3 inch LCD display, 128* 64 resolution
Gimbal Type: HALL Sensor
Upgrade method: USB online upgrade
Simulator mode: 3.5mm standard ppm output or USB
Battery: 2x18650 (Battery not included)
External Micro SD Card: reserved SD card slot

 

Jumper T pro radioJumper T pro remote controllerJumper T pro radio in stockjumper radio t proJumper t pro with elrsJumper T pro radioJumper T pro radioJumper T pro radio saleJumper T pro radioJumper T pro radioJumper T pro radioJumper T pro radioJumper T pro radioJumper T pro radio

Package includes:
1pcsx Happymodel Mobula7 1S Micro FPV Whoop Drone
1pcsx  Jumper T Pro ELRS Radio

Customer Reviews
0.0 0 Reviews
Write a review
Message Us

Adding to cart succeed!

items in cart.

Total:

Requires a minimum purchase of {MinPrice}. And you still need to meet the requirements.

Proceed to Checkout Return to Shopping